is here! Shop now, pay later in 4 easy installments
Not all drivers are created equal, and the visually inspiring Elate Carbon woofers were developed with next level performance in mind. These new drivers get their Carbon moniker from their triple layer cones from which they are derived, consisting of two layers of carbon fiber sandwiching a Rohacell foam core. These proprietary cones were developed to give them incredible stiffness, high damping and light weight—the trifecta for cone performance.
Paired with a large 3-inch diameter Hexatech aluminum voice coil, titanium former, and Morel’s EVC motor technology, the Elate Carbon achieves remarkable control and low distortion. which translates to highly transparent and bass-rich sound reproduction.
Few speakers can match the midrange purity and rich bass performance of the Elate Carbon Pro woofers.
Specifications
| Reference Series | MW9 |
| Configuration | Midbass Woofer |
| Power Handling | 200 W/RMS Max. 1000 W/RMS |
| Nominal Impedance | 4 ohms |
| Sensitivity | 89 dB |
| Frequency Resp. | 25 - 3,000 Hz |
| Resonant Freq. FS Hz | 44 |
| Voice Coil Size | 75 mm |
| Voice Coil Height | 14.5 mm |
| Voice Coil Former | Titanium |
| Voice Coil Wire | Hexatech aluminium |
| DC Resistance | 3 6 ohms |
| Voice Coil Induction | 0.615 @ 1 kHz (mH) |
| Magnet System | Double Magnet Rear Vented |
| HE-Magnetic Gap Height | 5 mm |
| B-Flux Density (T) | 0.74 |
| BL Product /BXL | 5.15 |
| Max Linear XMax | +/- 4.75 mm |
| Magnet System | Neodymium Rear Vented |
| Suspension Compliance CMS | 0.36 mm |
| Electrical Q Factor QES | 0.61 |
| QTS | 0.56 |
| QMS | 6 |
| Mech. Resist.RMS-N.S/M | 1.2 |
| MMS (Grams) | 30 |
| Equiv. Can Air Load VAS-L | 30.9 |
| Effect. Piston Area SD sq.cm | 219 |
| Cone Type | One-piece formed |
| Dome Material | DPC |
| Unit Diameter | 222 mm |
| Mounting Depth | 71 |
| Mounting Cutout | 192 mm |
| Net Weight | 1.42 kg |
| Speaker Grills | Lotus Grills Included |
CARBON FIBER CONE
Derived from the drivers of our award-winning fat lady speaker system, this cone design is comprised of two exterior carbon fiber skins sandwiching a layer of Rohacell, a high strength, featherweight foam. The combination forms a cone that is light, strong and properly damped for naturally uncolored audio reproduction.
LOTUS GRILLE
Inspired by the Lotus flower, engineered to offer an acoustic transparent solution to protect the loudspeakers whilst offering a beautiful design element. The specific pattern minimizes the “horn” effect found in traditional grilles.
The Lotus grille is a registered design protecting Morel’s intellectual property.
NEODYMIUM MAGNET
The most powerful magnet available, neodymium enables Morel to create physically compact speakers, such as tweeters and midrange, that fit in very limited spaces without limiting the quality of sound.
